Medical equipment and supplies
Home \ We offer \ Medical gas system \ Medical air compressor systems (MACS)

Medical air compressor systems (MACS)

Medical air compressor systems

G.SAMARAS SA manufactures medical air compressor systems according to EN ISO 7396-1 and HTM 02-01.The medical compressed air plant provides a reliable and constant air supply, without the transport and management costs associated with heavy gas cylinders. A wide range of models are available to satisfy all sites of installations. The plants are designed to operate at a maximum of 10 bar. All range includes duplex components to ensure constant operation of the system.All systems are manufactured according to the projects needs, whereas the available subsystems (elements) are the following:

  • Compressors (Screw / Piston / Scroll / Oil free / Oil bath). Range:1 - 120Hp
  • Vessels (Painted / Galvanised / Vitroflex). Capacity: 500 - 5.000lt
  • Dryers (Adsorption / Cooling)
  • Filters (Pre-filters / After-filters)
  • Water / Oil separators
  • Automatic drains (Pneumatic / electrical / zero-loss)
  • Activated carbon towers
  • CO reduction filters
  • Second stage pressure regulator unit
  • Emergency inlet point
  • Electronic control panel

All systems could be constructed in compact or not set up.


Adsorption dryer

The adsorption dryers are being used in cases that medical compressed air needs drying (medical air plants, oxygen generator plants). Once the compressed air enters the beds-towers, the desiccant material thereby regulate the dew point so as to retain water and allow dry compressed air to continue to the network.

Product highlights:
• Top operational reliability
• Minimum operation cost
• Long life time
• Easy maintenance
• User friendly
• Low installation cost
All the above mentioned advantages derive from the following technical characteristics:
• Precise dew point control providing efficient and economical operation (economizer)
• Fix mode of pressure dew points (options of: -20°C, -40°C, -60°C, -70°C or user defined)
• Adapted mode of pressure dew points through economizer (options of: -20°C, -40°C, -60°C, -70°C or user defined)
• Low differential pressures
• Desiccant of high quality
• Single or double configuration according to EN 7396-1 and HTM 02-01
• Multi-bed option with active carbon or CO and CO2 reduction bed
• Cyclic operation supported (up to 4 as optional)
• Desiccant bed of 2 layer (water resistant)
• Long life desiccant service (15 years)
• High quality pressure vessels made in EU
• Vessels galvanized internally and painted externally
• Top quality, extra durable coating
• Full electronic control panel
• Ecomode system
• Embedded filter station (optional)
• Auto restart mode


Compact Medical Compressed Air Central Station according to ISO 7396-1 Class 1.4.1 with:
•    1 oil free piston compressor belt driven
•    2 electromagnetic inlet valves
•    1 vessel 270lt
•    1 automatic drain
•    1 cooling dryer
•    1 RB filters
•    1 RA filters
•    1 RF filters
•    1 electronic and control panel
•    complete with safety valves pressure switch and sensors


Compact Medical Compressed Air Central Station according to ISO 7396-1 Class 1.2.1 with:

  • 2 direct piston oil bath compressors 3.8 Kw, 36m3/h
  • 2 electromagnetic inlet valves
  • 1 vessel 500lt
  • 1 automatic drain
  • 1 adsorption dryer with economizer
  • 1 RB filters
  • 1 RA filters
  • 1 RF filters
  • 1 CA filters
  • 1 Sterile filters
  • 1 electronic and control panel
  • complete with safety valves pressure switch and sensors

Compact Medical Compressed Air Central Station according to ISO 7396-1 Class 1.4.1 with:
•    2 piston belt driven oil bath compressors 10 Hp, 72,6m3/h
•    2 electromagnetic inlet valves
•    1 automatic drain
•    1 cooling dryer
•    1 RB filters
•    1 RA filters
•    1 RF filters
•    1 electronic and control panel
•    complete with safety valves pressure switch and sensors
•    vessel buffer 50lt
•    after cooler with automatic drain

1
2
3
4
ADEC_DRYER_44
central_c_air_compact_piston_15
COMPRESSED_AIR_2
COMPRESSED_AIR_WITH_PISTON_15
Address:
Katta-Darkhan str., 25, Mirzo-Ulugbek dstr., Tashkent, Uzbekistan