Medical Air Compressor Systems (MACS)

G.SAMARAS SA manufactures medical air compressor systems in accordance with EN ISO 7396-1 and HTM 02-01. The medical compressed air unit provides a reliable and constant supply of air without the transportation and management costs associated with heavy gas cylinders. A wide range of models is available to suit all installation locations. The units are designed to work no more than 10 bar. The entire range includes duplex components to ensure continuous system operation. All systems are made according to the needs of the project, while the following subsystems (elements) are available:

• Compressors (screw / piston / scroll / oil-free / oil bath). Range: 1 - 120 HP
• Vessels (Painted / Galvanized / Vitroflex). Capacity: 500 - 5.000 l
• Dryers (adsorption / cooling)
• Filters (pre-filters / post-filters)
• Water / oil separators
• Automatic drains (pneumatic / electric / lossless)
• Activated carbon towers
• CO reduction filters
• Second Stage Pressure Regulator Block
• Emergency entry point
• Electronic control panel

All systems can be built compactly or not configured.

Adsorption dryers are used when medical compressed air needs to be dried (medical air units, oxygen generation units). Once the compressed air enters the support columns, the drying material thus regulates the dew point by retaining water and allowing dry compressed air to enter the network.

Product Main Features:
• High operational reliability
• Minimum operating costs
• Long service life
• Easy maintenance • Convenience
for the user
• Low installation costs
All of the above advantages result from the following technical characteristics:
• Accurate dew point control for efficient and economical operation (economizer)
• Fixed pressure dew point mode (options: -20°C, -40°C, -60°C, -70°C or user defined)
• Adapted pressure dew point mode via economizer (options: -20°C, -40°C, -60°C, -70°C or user defined)
• Low pressure drops
• High quality desiccant
• Single or double configuration according to EN 7396-1 and HTM 02-01
• Option with multiple layers of activated carbon or CO and CO2 reduction layer
• Supports cyclic operation (up to 4 optional)
• Double layer
dryer (water resistant) • Long service life of the dryer (15 years)
• Made high quality pressure vessels in the EU
• Vessels are galvanized on the inside and painted on the outside
• High quality, ultra-durable coating
• Fully electronic control panel
• Ecomode system
• Built-in filtration station (option)
• Auto restart mode

Compact medical compressed air central station according to ISO 7396-1 class 1.4.1 with:
• 1 oil-free piston compressor with belt drive
• 2 solenoid intake valves
• 1 vessel 270 l
• 1 automatic drain
• 1 cooling dryer
• 1 RB filter
• 1 RA filters
• 1 RF filter
• 1 electronic control panel
• complete with pressure relief valves and sensors

Compact medical compressed air central station according to ISO 7396-1 class 1.2.1 with:

• 2 direct piston compressors with oil bath 3.8 kW, 36 m3/h
• 2 solenoid intake valves
• 1 vessel 500 l
• 1 automatic drain
• 1 adsorption dryer with economizer
• 1 RB filter
• 1 RA filter
• 1 RF filters
• 1 CA filters
• 1 Sterile filters
• 1 electronic control panel

complete with pressure relief valves and sensors

Compact medical compressed air central station according to ISO 7396-1 class 1.4.1 with:
• 2 x 10 hp belt driven oil bath compressors, 72.6 m3/h
• 2 solenoid intake valves
• 1 automatic drain
• 1 cooling dryer
• 1 RB filters
• 1 RA filter
• 1 RF filter
• 1 electronic control panel
• complete with safety valves, pressure switches and sensors
• buffer capacity 50 l
• after cooler with automatic drain